DriveView 9: A Powerful Software Tool for LS ELECTRIC Inverters
If you are looking for a software tool that can help you with engineering, monitoring, and maintaining LS ELECTRIC inverters, you should check out DriveView 9. DriveView 9 is a user-friendly and versatile software that allows you to remotely access, control, and optimize your drives from your PC. In this article, we will introduce DriveView 9 and its features, show you how to install and connect it to your drives, and guide you through some common tasks that you can perform with it.
What is DriveView 9 and what can it do?
DriveView 9 is a software tool for engineering the LS ELECTRIC inverter, referred to as drives. The tool holds the features for remote monitoring the drives connected to DriveView 9 and supports the necessary tasks needed for start-up and maintenance. DriveView 9 has the following main functions:
driveview 9 download
Remote monitoring and control of drives
With DriveView 9, you can monitor the status and parameters of your drives in real time, such as speed, torque, current, voltage, frequency, power, etc. You can also control the operation of your drives, such as start, stop, jog, direction, speed reference, etc. You can also set up alarms and notifications for any abnormal conditions or events that occur in your drives.
Parameter editing and backup
With DriveView 9, you can edit the parameters of your drives according to your application needs. You can change the values of individual parameters or use predefined parameter sets for different modes or functions. You can also save the parameters of your drives to your PC or load them from your PC. This way, you can easily backup or restore your drive settings.
Trip history and event log
With DriveView 9, you can view the trip history and event log of your drives. The trip history shows the details of the last 10 trips that occurred in your drives, such as trip code, time, date, parameter values, etc. The event log shows the records of the events that occurred in your drives, such as power on/off, parameter change, alarm, etc. You can also clear the trip history and event log if needed.
Graphical display and trend analysis
With DriveView 9, you can display the data of your drives in graphical forms, such as bar graphs, line graphs, pie charts, etc. You can select up to four parameters to display at the same time and customize the appearance of the graphs. You can also analyze the trends of the data over time and export the graphs to image files or Excel files.
Firmware update and drive diagnosis
With DriveView 9, you can update the firmware of your drives to the latest version. You can download the firmware files from the LS ELECTRIC website or use the ones provided by LS ELECTRIC. You can also diagnose any errors or faults that occur in your drives using DriveView 9. You can check the error codes, descriptions, causes, and solutions for each error or fault.
How to install DriveView 9 on your PC
To use To use DriveView 9, you need to install it on your PC first. Here are the steps to install DriveView 9 on your PC: System requirements and compatibility
Before installing DriveView 9, make sure that your PC meets the following system requirements:
Operating system: Windows XP, Windows Vista, Windows 7, Windows 8, Windows 10 (32-bit or 64-bit)
CPU: Pentium IV 1.6 GHz or higher
RAM: 512 MB or higher
HDD: 100 MB or higher
Display: 1024 x 768 pixels or higher
USB port: USB 2.0 or higher
Also, make sure that your drives are compatible with DriveView 9. DriveView 9 supports the following LS ELECTRIC drive products:
driveview 9 software installation guide
driveview 9 parameterization of ls drives
driveview 9 oscilloscope function
driveview 9 drive testing
driveview 9 parameter backups
driveview 9 rs-485 connection
driveview 9 modbus rtu protocol
driveview 9 manual pdf
driveview 9 release note
driveview 9 youtube tutorial
driveview 9 compatible drives
driveview 9 troubleshooting
driveview 9 update version
driveview 9 license key
driveview 9 free download
driveview 9 vs drive view 5
driveview 9 for windows 10
driveview 9 for mac
driveview 9 online support
driveview 9 user reviews
driveview 9 features and benefits
driveview 9 system requirements
driveview 9 alternatives and competitors
driveview 9 pricing and plans
driveview 9 demo and trial
driveview 9 customer service and contact
driveview 9 faq and help center
driveview 9 how to use and tips
driveview 9 best practices and examples
driveview 9 case studies and testimonials
driveview 9 advantages and disadvantages
driveview 9 comparison and review
driveview 9 coupon code and discount
driveview 9 affiliate program and commission
driveview 9 warranty and guarantee
driveview 9 refund policy and terms of service
driveview 9 feedback and suggestions
driveview 9 error codes and solutions
driveview 9 forum and community
driveview 9 blog and news
iS7
iP5A
iG5A
S100
H100
iE5
iC5
L100
M100
S8000
S9000
S10000
S12000
S15000
S20000
S30000
S40000
S50000
S60000
S70000
S80000
S90000
MV1000/2000/3000/4000/5000/6000/7000/8000/9000/10000/11000/12000/13000/14000/15000/16000/17000/18000/19000/20000/21000/22000/23000/24000/25000/26000/27000/28000/29000/30000 (MV Drive)
Installation steps and options
To install DriveView 9, follow these steps:
Download the DriveView 9 installation file from the LS ELECTRIC website or use the CD-ROM provided by LS ELECTRIC.
Run the installation file and follow the instructions on the screen.
Select the language and the destination folder for DriveView 9.
Select the components to install. You can choose to install DriveView 9, USB driver, and user manual.
Click Install and wait for the installation to complete.
Click Finish and restart your PC if prompted.
You can also customize some options for DriveView 9 during or after the installation, such as:
Shortcut creation: You can choose to create shortcuts for DriveView 9 on your desktop, start menu, or quick launch bar.
Auto run: You can choose to run DriveView 9 automatically when you connect a drive to your PC via USB.
Auto update: You can choose to check for updates for DriveView 9 automatically or manually.
Language: You can choose the language for DriveView 9 from English, Korean, Chinese, Japanese, Spanish, French, German, Italian, Russian, Turkish, or Portuguese.
USB driver installation for H100 product
If you are using the H100 product, you need to install the USB driver separately after installing DriveView 9. The USB driver is required for communicating with the H100 product via USB. To install the USB driver, follow these steps:
Connect the H100 product to your PC via USB cable.
Open the Device Manager on your PC and find the H100 product under Other devices.
Right-click on the H100 product and select Update Driver Software.
Select Browse my computer for driver software and locate the USB driver folder in the DriveView 9 installation folder.
Click Next and wait for the driver installation to complete.
Click Close and check that the H100 product is recognized as a COM port under Ports (COM & LPT).
How to connect DriveView 9 to your drives
To use DriveView 9, you need to connect it to your drives via a communication method and protocol. Here are the steps to connect DriveView 9 to your drives:
Supported communication methods and protocols
DriveView 9 supports the following communication methods and protocols:
Communication MethodProtocolDescription
RS-232C/RS-485Modbus RTUA serial communication protocol that uses binary data transmission. It requires a RS-232C/RS-485 converter and a cable to connect to your drives.
EthernetModbus TCP/IPA network communication protocol that uses TCP/IP data transmission. It requires a Ethernet cable or a wireless router to connect to your drives.
USBHID (Human Interface Device)A plug-and-play communication protocol that uses USB data transmission. It requires a USB cable to connect to your drives. It is only available for H100 product.
BACnet MS/TPBACnet MS/TPA serial communication protocol that uses RS-485 data transmission. It is designed for building automation and control systems. It requires a BACnet MS/TP converter and a cable to connect to your drives.
BACnet IPBACnet IPA network communication protocol that uses UDP/IP data transmission. It is designed for building automation and control systems. It requires a BACnet IP converter and a cable or a wireless router to connect to your drives.
LONWORKSLONWORKSA network communication protocol that uses twisted pair data transmission. It is designed for building automation and control systems. It requires a LONWORKS converter and a cable to connect to your drives.
METASYS N2METASYS N2A serial communication protocol that uses RS-485 data transmission. It is designed for Johnson Controls METASYS system. It requires a METASYS N2 converter and a cable to connect to your drives. Project creation and drive configuration
To connect DriveView 9 to your drives, you need to create a project and configure your drives. A project is a collection of drives that you want to communicate with using DriveView 9. To create a project and configure your drives, follow these steps:
Open DriveView 9 and click on the New Project icon or select File > New Project.
Enter a name for your project and click OK.
Click on the Add Drive icon or select Edit > Add Drive.
Select the drive product that you want to add from the list and click OK.
Enter a name and an address for your drive. The address is the communication address of your drive, which should match the parameter P9.01 (Communication Address) of your drive.
Select the communication method and protocol that you want to use from the list and click OK.
Repeat steps 3 to 6 for each drive that you want to add to your project.
Save your project by clicking on the Save Project icon or selecting File > Save Project.
Connection settings and test
To connect DriveView 9 to your drives, you need to set up the connection settings and test the connection. The connection settings are the parameters that define how DriveView 9 communicates with your drives, such as baud rate, parity, data bits, stop bits, etc. To set up the connection settings and test the connection, follow these steps:
Select the drive that you want to connect from the project tree on the left side of the screen.
Click on the Connection Setting icon or select Communication > Connection Setting.
Enter or select the values for the connection settings according to your communication method and protocol. The values should match the parameters P9.02 (Baud Rate), P9.03 (Parity), P9.04 (Data Bits), P9.05 (Stop Bits), etc. of your drive.
Click OK to save the connection settings.
Click on the Connect icon or select Communication > Connect.
Wait for DriveView 9 to establish the connection with your drive. If the connection is successful, you will see a green light on the bottom right corner of the screen. If the connection fails, you will see a red light and an error message.
Repeat steps 1 to 6 for each drive that you want to connect to DriveView 9.
How to use DriveView 9 for various tasks
Once you have connected DriveView 9 to your drives, you can use it for various tasks, such as monitoring, controlling, editing, viewing, displaying, updating, and diagnosing your drives. Here are some examples of how to use DriveView 9 for these tasks:
Monitoring and controlling drive status and parameters
To monitor and control your drive status and parameters, follow these steps:
Select the drive that you want to monitor or control from the project tree on the left side of the screen.
Click on the Monitor/Control icon or select View > Monitor/Control.
You will see a window that shows the status and parameters of your drive in different tabs, such as Basic, Extended, I/O, etc. You can switch between tabs by clicking on them.
To monitor your drive status and parameters, you can view the values and units of each parameter in real time. You can also click on the Refresh icon or press F5 to update the values manually.
To control your drive status and parameters, you can change the values of some parameters by entering new values or using buttons or sliders. You can also click on the Control Panel icon or press F4 to open a control panel that allows you to control the operation of your drive, such as start, stop, jog, direction, speed reference, etc.
Editing and saving drive parameters
To edit and save your drive parameters, follow these steps:
Select Select the drive that you want to edit or save from the project tree on the left side of the screen.
Click on the Parameter Edit icon or select View > Parameter Edit.
You will see a window that shows the parameters of your drive in different groups, such as Basic, Extended, I/O, etc. You can switch between groups by clicking on them.
To edit your drive parameters, you can change the values of each parameter by entering new values or using buttons or sliders. You can also use the Search function to find a specific parameter by name or number.
To save your drive parameters, you can click on the Save icon or press F2 to save the parameters to your drive. You can also click on the Save As icon or press F3 to save the parameters to a file on your PC. You can also click on the Load icon or press F1 to load the parameters from a file on your PC.
Viewing and clearing trip history and event log
To view and clear your trip history and event log, follow these steps:
Select the drive that you want to view or clear from the project tree on the left side of the screen.
Click on the Trip History icon or select View > Trip History.
You will see a window that shows the trip history and event log of your drive in different tabs. You can switch between tabs by clicking on them.
To view your trip history, you can see the details of each trip that occurred in your drive, such as trip code, time, date, parameter values, etc. You can also click on the Export icon or press F5 to export the trip history to a file on your PC.
To view your event log, you can see the records of each event that occurred in your drive, such as power on/off, parameter change, alarm, etc. You can also click on the Export icon or press F5 to export the event log to a file on your PC.
To clear your trip history and event log, you can click on the Clear icon or press F4 to clear the data from your drive. You can also select which data to clear by checking or unchecking the boxes for Trip History and Event Log.
Displaying and analyzing drive data in graphs
To display and analyze your drive data in graphs, follow these steps:
Select the drive that you want to display or analyze from the project tree on the left side of the screen.
Click on the Graph Display icon or select View > Graph Display.
You will see a window that shows the graph display and trend analysis of your drive data in different tabs. You can switch between tabs by clicking on them.
To display your drive data in graphs, you can select up to four parameters to display at the same time from the list on the left side of the window. You can also customize the appearance of the graphs by changing the colors, scales, labels, etc. from the options on the right side of the window.
To analyze your drive data in graphs, you can use the tools on the bottom of the window, such as zoom in/out, cursor, marker, etc. You can also click on the Start/Stop icon or press F5 to start or stop recording the data. You can also click on the Export icon or press F6 to export to export the data to a file on your PC or Excel.
Updating firmware and diagnosing drive errors
To update the firmware and diagnose the errors of your drive, follow these steps:
Select the drive that you want to update or diagnose from the project tree on the left side of the screen.
Click on the Firmware Update icon or select View > Firmware Update.
You will see a window that shows the firmware update and diagnosis of your drive in different tabs. You can switch between tabs by clicking on them.
To update the firmware of your drive, you can click on the Browse icon or press F1 to select the firmware file from your PC or download it from the LS ELECTRIC website. You can also check the current firmware version of your drive and compare it with the new firmware version. You can then click on the Update icon or press F2 to start the firmware update process. You can also click on the Cancel icon or press F3 to stop the firmware update process.
To diagnose the errors of your drive, you can see the list of error codes, descriptions, causes, and solutions for each error that occurred in your drive. You can also click on the Clear icon or press F4 to clear the error codes from your drive. You can also click on the Export icon or press F5 to export the error codes to a file on your PC.
Conclusion and FAQs
DriveView 9 is a powerful software tool that can help you with engineering, monitoring, and maintaining LS ELECTRIC inverters. It has many features and functions that can help you remotely access, control, and optimize your drives from your PC. It is easy to install, connect, and use DriveView 9 for various tasks. If you want to learn more about DriveView 9, you can refer to the user manual or visit the LS ELECTRIC website. Here are some frequently asked questions about DriveView 9:
Q: Where can I download DriveView 9?
A: You can download DriveView 9 from the LS ELECTRIC website or use the CD-ROM provided by LS ELECTRIC. The download link is
Q: How can I get technical support for DriveView 9?
A: You can get technical support for DriveView 9 by contacting LS ELECTRIC customer service center or your local LS ELECTRIC distributor. The contact information is
Q: How can I check for updates for DriveView 9?
A: You can check for updates for DriveView 9 by clicking on the Check for Updates icon or selecting Help > Check for Updates. You can also choose to check for updates automatically or manually from the options menu.
Q: How can I change the language for DriveView 9?
A: You can change the language for DriveView 9 by clicking on the Language icon or selecting Options > Language. You can choose from English, Korean, Chinese, Japanese, Spanish, French, German, Italian, Russian, Turkish, or Portuguese.
Q: How can I backup or restore my project and drive settings?
A: You can backup or restore your project and drive settings by clicking on the Backup/Restore icon or selecting File > Backup/Restore. You can choose to backup or restore your project file, drive parameter file, trip history file, event log file, graph data file, etc. 44f88ac181
Comments